Avaya PoE Power Injector Cable

PoE Injector cable - Replaces Power Supply 1151C1 / 1151D1 / 1151D2

Main Menu:

Home
- Tech Central Home
- Refurb Supplies Home
Brands
- Avaya - Lucent - AT&T
- Cisco
- Comdial
- Executone
- Intertel
- Mitel
- NEC
- Nortel
- Panasonic
- Polycom
- Samsung
- Spectralink
- Toshiba
- Vodavi
- OTHER
Phone Parts
Helpful Info
Photos
Contact

Networking:

Works with the following Avaya models 4606, 4612, 4624 IP Telephones

4601, 4602, 4602SW, 4610SW, 5601, 5602, 5602SW, 5610SW

4620, 4620SW, 4621SW, 4622SW, 4625SW, 5620SW, 5621SW

4630SW

9610, 9620, 9630, 9640, 9650

Also: 7444 and 8434D
Note: 9630G, 9640G & 9670G require a different power configuration

Avaya PoE passive power injector cable

48v DC 410mAh Power supply with injector cable.

A passive PoE injector cable will 'inject' power into the line for your VoIP telephone.

This PoE injector reduces cost and potential problems because it only requires one cord.

Avaya PoE 30000 VoIP power injector cable

Shielded CAT6 cable, RJ45 plug and jack

The standard power brick requires two lan cables. Our passive PoE injector eliminates one of these cables and reduces the total connections involved by one! This reduces cost and complexity while also reducing the potential for bad connections by up to 50%

Avaya PoE diagram

Twist locking power connector
Eliminates the risk of accidental power loss

Power and Linked LED indicator

Power LED will light when power is connected to the PoE injector cable.

Linked LED will only light after a phone is attached.

To troubleshoot cabling errors, you can easily tell when power is connected or if a telephone is attached simply by looking at the passive PoE injector. No matter where you install the cable!